樹脂吸附式干躁機

◆產品的作用 Product features

※還具有固定同樣的撒氣壓和露點

1.吸附性塔之間距與厚度經調查的結果高精度核算，塔床風阻小，保護了縮短氣休太干劑5秒的接觸性用時，足夠原材料氣的露點的要求。

2.30％的烘干劑數量，使用在賠償標準烘干劑的自燃老化試驗，抓實烘干。

3.中小型散出器，保障氣團飽滿可以通過晾干劑層，清理溝流不良現象。

※可再生氣量耗用少于14％

1.菁英的機筒規劃，留存100％的物理吸附熱量，處理的熱量廣泛用于曾加重復周期的重復氣濕度，提高自己設配的解吸意識，可使得重復更徹底刪除文件。

2.缺水和機體機體再生應用倒置煙囪效應措施，濕空氣中穿過干的氣體吸附劑時效性果最佳。機體機體再生氣出口量含濕量把控好在亞飽和階段階段，使消音器原理器及泄壓閥清算通道無冷凝水之慮。

3.可基于低溫干燥機的執行額(e)定負載標準控制回收利用氣需水量，以保證回收利用熱空氣連續不斷穩定的，回收利用心理壓力低至臨界點。

※干燥的劑采用使用期長

1.好的機筒圖片尺寸，使氣體能夠變干劑層的風速和準確時間實現好的壯態，有力發揮作用變干劑的效能。

2.節省的體系硬件配置，在環流開始機筒前，經除油加工處理有效去掉環流中內嘴油物與重環境環境有害特性，減少皮膚干燥劑層受環境破壞。

※機器應用了有意思高品質電動及汽動閥和耐用的全光學可c語言編程序管理器，組排介面舒適，智能重復彰顯雙塔工況法，無限循環時間間隔車間可編，出廠之控制在10min。伐門壽命短歷時50萬次瑜伽動作。

※壓力容器封頭內壁上作冷熱鍍金屬防腐加工處理，10年不脫漆。

※健身動作合理、的性能保持穩定、實操簡約，布置不須基礎上。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆主要能力因素 Main technical parameters